Neuspeed 19mm swaybar

Funkadelic's gallery / Car related / Audi S4 Mods / Neuspeed 19mm swaybar

Neuspeed 19mm swaybar

Note where the stock bushings are mounted (there is a "stop" on the stock swaybar). Use this as a guide to mount the n

Use a disposable latex glove or similar...you don't want to get the supplied bushing grease on your skin...it's **VERY** sticky.

Bushings mounted on new swaybar. TIP: see next caption regarding the driver-side bushing/bracket

Install the new swaybar by sliding the driver side in first. Tip: It is easier if you don't put the driver-side bushing/bracket

New swaybar in, driver side bracket inserted and hanging loosely

Passenger side subframe bracket, which secures to the two holes to the right of it.

It's a total pain in the arse getting in behind the brackets to secure them. The lower control arm gets in the way.

I ended up getting off the wheel ramps and jacking each side up one at a time to lower the control arm so that I had more room t

Page 2 of 3