Funkadelic's gallery / Miscellaneous / Creative Nomad Muvo2 4gb microdrive removal

Creative Nomad Muvo2 4gb microdrive removal

The Muvo2
Muvo2 backside with batter cover removed
Remove the 4 screws on the back cover and it removes easily
Use a small flat tip surface (eg. screwdriver tip) to lift the circuit board up and out of the way
There are 4 screws holding the microdrive plate down. Note the piece of electrical tape covering the screw in the uppper right s
Plate removed..and voila the backside of the Hitachi microdrive
The electronics removed from the case
My old 1GB IBM microdrive next to the Hitachie 4GB microdrive (frontside)
My old 1GB IBM microdrive next to the Hitachie 4GB microdrive (backside)

You can also find these pictures in the following article from Wired News

Powered by Gallery v2.3